[TechAssist] Re: Philips CCZ194 tvcr power wont stay on fixed
- From: peggs <peggs@xxxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx, <Techassist@xxxxxxxxxxxxx>
- Date: Mon, 28 Oct 2002 11:33:48 -0500
Sounds like it could be a slipping belt(intermittent).
You may want to load/unload a cassette several timer
to verify.
Also,the LED's can be weak on these Combo's.
Peggs
At 12:20 PM 10/28/02 -0500, J Silverman wrote:
>
>When power was plugged in on this 1998 model, could hear loading motor run
>for a few seconds and power would shut off. Opening up the unit it was very
>dusty inside. Cleaned the top of the prism and now loadind motor behavior
>was normal but tapes would stop playing after 7 seconds. Took prism out and
>cleaned all surfaces and tapes would play normally. JIC took chassis out and
>cleaned the photosensors and mirrors. They were visibly dirty.
>Jerry Silverman
>Greentron Inc
>4 Newland Ave
>Greenville SC 29609
>864 232 3889
>Fax 271 2080
>mailto:greentron@xxxxxxx
>
>
>------------------------------------------
>To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
>To CHANGE your email address, click here:
> http://www.techassist.net/forms/change.html
>------------------------------------------
>***NEW*** Tips Added Instantly!!!***
>Submit Repair Tips here:
>http://www.tech-assist.org/secure/tip/
>
Peggs' Electronics
1519 West 2nd Street
Owensboro,KY 42301
270-926-4968
fax 270-686-7399
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
