Check the blue CRT. It's probably cracked at the face. Corey Brazell Audio Video Electronics 12169 SC Hwy 121 Newberry SC 29108 > [Original Message] > From: Shoreline Electronics <jstielau@xxxxxxxx> > To: Tech Assist <techassist@xxxxxxxxxxxxx> > Date: 2/25/2004 6:17:34 PM > Subject: [TechAssist] Philips 6P6051 PTV750 Blows HV Outputs > > > Make : Philips > Model : 6P6051 > Chassis : PTV750 > > HV Output transistor (Q906 2SD2539) was shorted and emitter resistor R934 > (.33 ohm 1/2 watt) was open on this one. > > Replaced both parts and T900 HV flyback and the parts shorted on power up > > Old flyback checked OK but changed it anyways to be sure > > Driving the circuit with the Sencore TVA92 shows good load draw but bad > timing (32us) Scoping collector of Q906 shows a good HV pulse but the > falling edge has an extra step on it...no ringing , just an extra little > porch. > > All timing parts check good. > > No cracked solder connections. > > Any ideas on this one? > > Can anyone confirm if this 32us timing is typical on this 700 series chassis > with their Sencore gear? > > Any other common issues other have seen? > > ================================= > Jeff Stielau > Shoreline Electronics Repair > 344 East Main Street > Clinton,CT 06413 > (860)399-1861 > (860)664-3535 FAX > jstielau@xxxxxxxx > ================================= > > > ---------------------------------------------------------------------------- - > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/