Make : Philips Model : TP2781 C101 Chassis : 27D7 Problem : No HV. LED flashes in groups of 5 We have done a few of these in the past and are familiar with the parts they wipeout when the flyback fails. All the typical parts that are either blown off the board or shorted test OK. I can drive the horizontal section with a Sencore HA2500 and it tests OK. We do have 130V on the collector of the horizontal output and see a brief pulse when the set tries to start. I'm fairly certain the flyback is prob bad ( surprised?)....but while I wait for one to arrive....has others seen this scenario on this chassis......bad flyback only? Drives good but breaks down under full load? ================================= Jeff Stielau Shoreline Electronics Repair 344 East Main Street Clinton,CT 06413 (860)399-1861 (860)664-3535 FAX jstielau@xxxxxxxx ================================= ***************************************************************************** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/