Might have a look at data and clock lines probably should be around 5V. Don Aurora Electronics Florida Aurtron@xxxxxxxxxx ----- Original Message ----- From: "teltek3" <teltek3@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, July 23, 2003 2:36 PM Subject: [TechAssist] Philips 27" PNH613 CH03 Chassis-26C9-04 > Problem..HV will come on when Power switch is pushed, No picture no sound. > If I advance screen control can see a raster. Will not turn off again by > pushing Power Switch. Have to pull plug. I see about 2 Philips a year, and > need a push in the right direction on this one. > > TIA > > -Ed- > Tel-Tek Electronics > Ontario-Canada > teltek3@xxxxxxxxxxxx > > **************************************************************************** * > Classifieds! Buy or Sell! > http://sell.tech-assist.org > The Tech Address Book: > http://www.tech-assist.org/secure/tip/contact.htm > Add a Repair Tip Here, or Change/Remove your Email Address: > http://www.tech-assist.org/secure/tip/main.htm > Lost Password: > http://www.tech-assist.org and select "Lost your Login Info?". > Email Archives: > //www.freelists.org/archives/techassist/ ***************************************************************************** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/