In a message dated 3/10/2004 8:25:38 AM Pacific Standard Time, peggs@xxxxxxxxxxxxx writes: Peggs There is no voltage on the relay, and this set have both (relay K901) and degaussing relay(RP901) Jose any voltage on the relay coil ??? Is that an on-off relay,or a degaussing relay ??? Peggs At 07:08 AM 3/10/04, Javiles6@xxxxxxx wrote: >Hello techs >I am working with this panasonic floor model that belong to a senior citizen. >The set is totally dead, no relay activities whatsoever. I have check the >bridge rectifier the filter capacitor and the relay but they check good. I >jump >the relay to see if the set turn on but nothing. I have also check the >turn on >switch and the AC cord and they are good. The only thing so far that`s no >good >is C960(10uf 160V) replace it but still dead. Fuses are not blown. Does >someone have any idea what can cause this. Your help is very appreciated. > >Thanks > >Jose > > >Aviles Computer & TV Repairs >508 Bingaman St >Reading, PA 19602 >Tel # 610-478-1342 ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/