Hello techs This set came in with a verical line across the middle of the set. I resolder the verical IC(IC451) but with no help, so i replace it with an NTE 7085. Now the set is about 4" open but with verical foldover. I have change C455(100uf/35v which was out of tolerance and C451(220uf/16V) but with no help. I have the 12V at pin one of IC and the 26v at pin 7, also at pin 12. All of the other pin run from 5v to 6v, except pin 10 which GND and pin 9 OSC BLOCKING. I don`t have an schematic to be certain that this are the correct voltages. Does any one have the vertical section that could e-mail me or any help that could offer. Your help is always appreciated. Thanks Jose Aviles Computer & TV Repairs 508 Bingaman st Reading, PA 19602 Tel # 610-478-1342 ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/