Have you checked the H drive transistor?? Does the volts go to 90V when C of h drive transistor is unsoldered Phillip R Hull STET phil245@xxxxxxxxxxxxx ----- Original Message ----- From: "Jim Myers" <jr.myers@xxxxxxxxxxx> To: "T/A list" <techassist@xxxxxxxxxxxxx> Sent: Thursday, January 09, 2003 10:10 AM Subject: [TechAssist] Panasonic Security Video Monitor WV-CK2020 no h drive > > Would anyone have a schematic or a tip for this unit, there is no horizontal > drive to the HOT base and only about 3.5v to the h drive transformer primary > side. HOT collector has about 90 volts and the red pwr led is on. I suspect > an open between the pwr supply and the h drive transformer but can't trace > it because of all the whiteout they put on the pc board. > TIA > ************************************ > Jim Myers > Since 1972 > Telrad Electronic Services Co. > Fort Wayne, IN 46815 > ************************************ > > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > > > ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html