Try changing the mode switch. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: <HSWAD@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, October 07, 2004 5:25 PM Subject: [TechAssist] Panasonic PVC2541 TVCR wonmt stay on > This set produces HV and indications that it wants to run but then shuts > down. I changed the Vertical IC assuming that the micro needed to see a > vertical > pulse. But it didn't help. The vertical is working for a second. High > voltage > pulses appear to be normal for the short period they are visible. VCR > appears to be working normally. It will load and unload even though the > TV will not > run. If I press the power button continuously and fast the screen will > light > and be filled out in of course a pulsing fashion. Does this sound > familiar > to anyone? > Hollis Bates, Field Engineer-retired, Lewiston, Maine,HSWAD@xxxxxxx > > > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/