[TechAssist] Re: Panasonic PV4411 VCR no FF/RW

  • From: "Intrepid Video Support" <support@xxxxxxxxxxxxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Thu, 19 Feb 2004 21:00:53 -0500

Paul,
Take that mode switch and time it one/two notches each direction and the unit 
will probably work.
I don't think I ever had one were the arrows were matched up exactly.

Jeff Dougherty
Intrepid Video TV/VCR
263 S Front St
Steelton PA 17113
fax...717-564-4952
www.intrepid-video.com www.tech-repair.net

----- Original Message ----- 
From: "Paul" <dntwntv@xxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, February 19, 2004 1:45 PM
Subject: [TechAssist] Panasonic PV4411 VCR no FF/RW


I replaced a broken slide rod and everything else works normal but will not FF 
or Rewind. The capstan
motor does not move when those functions are called for. Removed the belt to 
see if anything was loading
down the capstan motor. Motor still does not move in FF/Rew. The display says 
FF or Rew. then after a few
seconds due to no activity it shuts off. It will forward and reverse search. 
Have cleaned the mode switch.
Have doubled checked the timing. Difficult to get to the micro while it is 
working. Any ideas? I thought
about replacing the mode sw but it appears to be OK.     Paul

Paul ,B
Central TV&Video
Grover Beach Ca.


-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/




-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/

Other related posts: