Remove the cap on the G2 line see if G2 volts is there Robert tvservice@xxxxxxxxxxxxx H & H Electronics Inc ----- Original Message ----- From: "walter wood" <wwood_38478@xxxxxxxxx> To: "Tech Assist" <techassist@xxxxxxxxxxxxx> Sent: Thursday, April 29, 2004 10:49 AM Subject: [TechAssist] Panasonic CT-27L8G/ chassis BP404 UPDATE > This Jan. 2004 made set has likely never played as > it was bought salvage. > What I thought was a dead set, however is very much > alive. > I have High voltage, and sound, and filiments on > tuner and video inputs but NO raster. > Turning the screen control has NO effect. > The schematic I have does not show the crt module, > at least I haven't found it. > Does anyone have any advice?? > Thanks > Walter > > > ===== > Walter Wood > Future Tech Home Center > 2786 Hwy. 43 N. > Lawrenceburg Tn. 38464 > 931-829-3337 > Fax 931-829-4044 > mailto:wwood_38478@xxxxxxxxx > > > > > __________________________________ > Do you Yahoo!? > Win a $20,000 Career Makeover at Yahoo! HotJobs > http://hotjobs.sweepstakes.yahoo.com/careermakeover > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/