[TechAssist] Re: Panasonic CT27G31U Chassis AEDP272 regulator IC801 runsvery hot
- From: Phil Bader <tjanphyl@xxxxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Fri, 27 Feb 2004 09:26:01 -0500
IN this case did you use an OEM or generac reg IC? And from where?
I've seen some TVs that will run very hot with some aftermarket ICs.
Phil
MDileo0000@xxxxxxx wrote:
> Hi Folks,
>
> I serviced this for a shorted regulator, IC801 and blown primary fuse 3
> months ago and it is back with the same failure. I replaced the regulator,
> STK730-020, once again and the run voltages are normal, but the regulator is
> too hot
> to lay my finger on. I have had a few of these recently and all seem to have
> hot regulators. Is there something causing this or is it normal? Could not
> find
> anything in the archives or members tips. If someone could upload to the
> members area a schematic of any Panasonic/Quasar that uses this regulator, it
> would
> be appreciated. Thanks again,
>
> Dominic DiLeo
> Atlantic TV
> Freeport, Maine
>
> -----------------------------------------------------------------------------
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
--
Philip Bader
Jan Phyl TV Inc. (estab. 1976)
3420 Recker Hwy. Winter Haven, Fl. 33880
Fax (863) 299-8821
email: tjanphyl@xxxxxxxxxxxxxxx
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
