[TechAssist] Re: Panasonic AG-RT600P Time Lapse VCR

  • From: peggs <peggs@xxxxxxxxxxxxx>
  • To: techassist@xxxxxxxxxxxxx, techassist@xxxxxxxxxxxxx
  • Date: Thu, 18 Sep 2003 14:24:51 -0700

when you say it won't record..............
Mechanics won't move
IC3001 is a ............???


At 12:02 PM 9/18/03, Paul wrote:
>This time lapse recorder will not record. I have checked all the supply 
>voltages and traced signal from Video In to IC 3001 pin 7. I have followed 
>it in and out and around till pin 22, I lose it. I have checked the 
>voltage on every pin and found nothing abnormal. I hope someone works on 
>these and may have had the same problem. I don't want to replace 
>unnecessary parts if I can help it. It seems like the IC is the culprit 
>but not sure.  BTW, it plays back normally.    Paul
>Grover Beach Ca.
>Classifieds! Buy or Sell!
>The Tech Address Book:
>Add a Repair Tip Here, or Change/Remove your Email Address:
>Lost Password:
>http://www.tech-assist.org  and select "Lost your Login Info?".
>Email Archives:

Classifieds! Buy or Sell!
The Tech Address Book:
Add a Repair Tip Here, or Change/Remove your Email Address:
Lost Password:
http://www.tech-assist.org  and select "Lost your Login Info?".
Email Archives:

Other related posts: