I was able to confirm +5VDC standby power off Q19 is present. However when the power ON button is pressed the MAIN relay does not activate. What is the power ON pin off the micro on this chassis? I need to start somewhere. Again thanks, David Lessard Alexandria Electronics mr_fixit@xxxxxxxxxxxx -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of David Lessard Sent: Monday, April 05, 2004 11:28 AM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Panasonic 20" TV - PC-20L52R - Chassis? - Dead OK, when you all stop laughing, could you help out with some information on this oldie? The customer wants this fixed and is willing to pay $100, apparently the TV is sentimental. Fuses F0001 & F0002 are OK, HOT is OK, I haven't done much else (yet), trying to gather some information first, i.e. standby PS, ID the micro IC, etc. If any of you techs out there have some pointers, I'll take them. Thanks in advance, David Lessard Alexandria Electronics 50 Harrison Street P.O. Box 1366 Alexandria, Ontario. Canada K0C-1A0 mr_fixit@xxxxxxxxxxxx ------------------------------------------------------------------------ ----- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/