Jorge, You are one lucky dude,I am sending notes,meanwhile try changingC409 (3,3 mfd. off pin 15 of IC401 An5437). Notes are in JPEG. Good luck. al alleathe@xxxxxxxxxxxxx Al Leatherman Mine Hill, NJ 07803 973-361-5796 ----- Original Message ----- From: "Jorge Miret" <jmiret@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Sunday, January 20, 2002 6:13 AM Subject: [TechAssist] Re: Pana.CTH-1942R out of sync. > > Thanks Eric I replacet it but still have the same problem and also dont have > audio so I dont know if this is a multiple problem or only one problem with > both symtoms.Anyway will keep trying for a while if no success will give it > back to cust.,problably is not woth it. > Thanks, > Jorge. > ----- Original Message ----- > From: Eric Manuel <tvman@xxxxxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Sunday, January 20, 2002 5:34 PM > Subject: [TechAssist] Re: Pana.CTH-1942R out of sync. > > > > > > Hi jorge replace Q804-- 2SD637 or Ecg 199 Eric > > > > Jorge Miret wrote: > > > > > > Hi guys: > > > I have a Panasonic Model CTH-1942R (a little old) and have no schematic > for > > > it,is Sams 2538. > > > The problem is that is out of hor.sync but if I lower the input to > around > > > 80v will play ok,so I think > > > that it is not regulating ?.I replace q801 (scr) and check caps around > but > > > dont find anything wrong,even check resistor and are ok.If somebody > could > > > send me the regulator area to verify or any tips I will appreciate it. > > > TIA and have a good weekend. > > > Jorge. > > > Jorge Miret-Puerto Rico > > > J.C.Video & P.C.Repair > > > Tel:787-761-0920. > > > jmiret@xxxxxxxx > > > > > > ------------------------------------------ > > > Make your TechAssist database better! > > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > > > ------------------------------------------ > > > To UNSUBSCRIBE your email address, click here: > > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > > Or send a BLANK email with unsubscribe in the > > > SUBJECT field to the address above. > > ------------------------------------------ > > Make your TechAssist database better! > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > Or send a BLANK email with unsubscribe in the > > SUBJECT field to the address above. > > > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.