take the remote receiver out of the one that works and put it in the one that doesn't if it now works you need a remote receiver. al marquardt ampm@xxxxxxx ----- Original Message ----- From: "mick" <inter-network-solutions@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, January 16, 2002 3:30 AM Subject: [TechAssist] Palsonic TV problem > Hi , I'm hoping someone can help me, > I have a Palsonic TV, model number 3488, > chassis number 782-37620-010F , > what is happening is that the stand by light is on and > the TV won't switch on using remote, which is the only way to > turn the TV on from stand by . Remote checks out ok cause I have > another identical TV and the remote control works with that. > any help would be greatly appreciated. > Thank, > Mick > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > > > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.