Here is what I have on the STK730 series: STK730-010 = 110 watt STK730-020 = 145 watt STK730-030 = 180 watt STK730-040 = 210 watt STK730-130 = 105 watt STK730-150 = 170 watt I have have been told that sometimes you can replace one with a higher wattage. I hope this helps. Lee Bateman North Texas Distributors, Inc. Sherman, Tx. 75090 1-800-553-6168 www.Northtexasdistributors.com email: sales@xxxxxxxxxxxxxxxxxx -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of Robinson Electronics Sent: Friday, September 24, 2004 2:10 AM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] PTK195 convergence "pwr" board regulators Has anyone tried, or can anyone tell me if a STK730-020 will sub out for the regulator on these conv. pwr board assy? This has a STK730-130 regulator in it. The convergence on this set is bowed in about 3 in., top and bottom, I believe it's this board causing the problem, could not find any bad connections, or faults on the convergence main board. Thanks. David. Robinson Electronics 1075 Sweeten Creek Road Asheville, NC 28803 Ph./Fax. 828 274-3787 Toll Free. 1-888 ROBELECT www.robinsonelectronics.com www.robelect.com Mailto: RobinsonElectronics@xxxxxxxxxxx ---------------------------------------------------------------------------- - Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/