I had one with the wide picture wasn't the pin cushion diode and cap it was C4403 was down in value. al marquardt ampm@xxxxxxx ----- Original Message ----- From: "Huds" <huds@xxxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, November 01, 2002 12:02 PM Subject: [TechAssist] PROSCAN WITH PICTURE TO WIDE AND NOISE IN PICTURE > > I am working on a proscan rca model # PS31122/ CTC169EJ5 > And the picture is to wide and there is noise in the picture and I don't see > a tip on this one I've checked the caps > in the horz circuit and all seems to check good I don't know if I should > just change them out or not??? > any Info on this is Appreciated. > thanks Huds. > HUDSONS ELECTRONICS > Leroy Hudson > 112 Maple Dr. > Perry, Fl. 32348 > Ph:850-838-2125 > Fax:same # > email:huds@xxxxxxxxxxxxxxxxx > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/