[TechAssist] Re: PIP Bypass In The Download Area : Faulty!
- From: Tech Assist <admin@xxxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Thu, 27 Jan 2005 16:48:19 -0500
Well what is the file name can we correct the error?
J. Knoll TechAssist Monitor
TechAssist
225 Monticello Ave.
Clarksburg WV, 26301
www.tech-assist.org www.techassist.net
Toll Free 1-866-Tech-Aid 10.00 am to 5.00 pm EST Time
Fax 1-208-246-5422
Voice mail 1-304-695-0790
-------------------------------------------------------
PS:
If replying to this email, please include all previous correspondence.
It is the only way we can get the full picture. Thank You!!!
Shoreline Electronics wrote:
> The PIP bypass diagram in the download directory has an error!! The 22K ohm
> resistor should go from pin 11 to ground. NOT PIN 7! Pin 8 is ground and
> can be used!
>
> I actually used 4.7K and 2.2K for the voltage dividing network per previous
> documented procedures......but I assume the 47K & 22K combo/dividing ratio
> is equivalent.
>
>
>
>
>
> =================================
> Jeff Stielau
> Shoreline Electronics Repair
> 344 East Main Street
> Clinton,CT 06413
> (860)399-1861
> (860)664-3535 FAX
> jstielau@xxxxxxxx
> =================================
>
>
> -----------------------------------------------------------------------------
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
