The PIP bypass diagram in the download directory has an error!! The 22K ohm resistor should go from pin 11 to ground. NOT PIN 7! Pin 8 is ground and can be used! I actually used 4.7K and 2.2K for the voltage dividing network per previous documented procedures......but I assume the 47K & 22K combo/dividing ratio is equivalent. ================================= Jeff Stielau Shoreline Electronics Repair 344 East Main Street Clinton,CT 06413 (860)399-1861 (860)664-3535 FAX jstielau@xxxxxxxx ================================= ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/