Just plug some other yoke in and see what happens. If the power stays on, shut it off quickly so you dont burn the crt. Or, if you have the equipment, ring the yoke. If there are resistors under the yoke terminal board it will cause a low ring ---- Original Message ----- From: R&S ELECTRONICS <rselect@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, July 18, 2005 10:15 PM Subject: [TechAssist] PHILCO TV M/N R5862C PE01 chasis 25G1-02 > Hi > Thanks for the reply. > The set is dead. I want to know how can I check the yoke for being dead set. I swoped the chasis which had a bad tuner only and still the set wont come on. Just want to know if yoke causes the set to become dead. > > Thanks > R&S Electronics,PA > TEL/fAX:(717)532-6312 > Email:rselect@xxxxxxxxxxxx > -------------------------------------------------------------------------- --- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/