Hollis, From Tech Repair CD: ZENITH \A50M91W9 9-1978\Convergence/ Bent Lines In Pic/ Resistors Burnt On Convergence Board\\\9-1690 9-1978\Cr3419 Shorted And Fx3460 Blown Replaced Burned Resistors On Convergence Board R4161 & R1460\check resistors R3243 (110K) and R3244 (82K) on the 9-1978 module\\\\\\\ Jeff Dougherty Intrepid Video TV/VCR 263 S Front St Steelton PA 17113 fax...717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: <HSWAD@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, December 04, 2003 11:03 AM Subject: [TechAssist] PDF of Zenith RA56M91D9 I am working on a zenith projection that has a convergence problem. The original convergence board had burned resistors. I installed a rebuilt 9-1690-1 board and with it the picture looks worse. I have a blown fuse location FX3460. I called Zenith for a service Manual and they said it would be back ordered for at least a month. It is a unit that I am fixing at my own expense and donating to a school. Your help will be appreciated. Hollis Bates,Field Engineer-retired, Lewiston, Maine,HSWAD@xxxxxxx ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/