[TechAssist] Re: PDF document...schematics
- From: "Bruce Tiedeman" <btied@xxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sat, 26 Jan 2002 10:36:17 -0500
Will try this Clint thank you... Which one of your 3 address's to I send to
with private email?
Bruce.
----- Original Message -----
From: "OrpheusComputing.com Repair" <techassist@xxxxxxxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, January 25, 2002 12:58 AM
Subject: [TechAssist] Re: PDF document...schematics
>
> Bruce, change the compression settings (if you haven't) in
> the properties, and the dpi settings as well. Set
> compression to 'jpeg high' and dpi to as low as possible.
> With the dpi set low, make sure you can still zoom in and see
> any details needed. If you can't, you have to increase it.
> -Clint
>
> God Bless Us All
> Clint Hamilton, Owner
> http://OrpheusComputing.com
> http://ComputerHardware-ConsumerElectronics.com
> sales@xxxxxxxxxxxxxxxxxxxx
> Fax: 209-882-9602
> TechAssist Administration
> http://tech-assist.org
> techassist@xxxxxxxxxxxxx
> 4orpheus@xxxxxxxxxxxxx (alternates)
> orpheuscomputing@xxxxxxxxx
> (PLEASE include our previous correspondence
> if replying to this email!!)
>
>
> ----- Original Message -----
> From: "Bruce Tiedeman" <btied@xxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Thursday, January 24, 2002 11:05 AM
> Subject: [TechAssist] PDF document...schematics
>
>
>
> Making a PDF document with text and schematic information the
> program
> doubles the size of the document instead of compressing it.
> The program used to work fine but now makes the document
> larger and
> difficult to send over the net..
> The is Adobe Acrobat 5.
>
> Can some one shed some light on this problem... email private
> would be O.K
> not to fill the list with a slightly off topic discussion..
>
> thank you.
> Bruce
> B&T Electronics.
>
>
>
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
