Is it possible that the focus block ic bad? Jonas Miglinas TV Chicago ----- Original Message ----- From: "Phillip R. Hull" <phil245@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, January 23, 2003 7:01 PM Subject: [TechAssist] Re: P46729BA > > Did you forget the little rubber type gaskets for each wire??and did you use > OEM splitter?? > Phillip R. Hull STET > phil245@xxxxxxxxxxxxx > ----- Original Message ----- > From: "Barry Thompson" <barrystv@xxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Thursday, January 23, 2003 7:34 PM > Subject: [TechAssist] P46729BA > > > > > > Hi All Replaced the splitter and I am getting arcing in the pix, all 3 > > lenses.removed and replaced all the anodes about 10 times.Any ideas? > Thanks > > Barry > > barrystv@xxxxxxx > > Barrys TV > > 613 224 3406 > > Ottawa.Canada. > > > > ------------------------------------------ > > Submit A Repair Tip For Everyone Here: > > http://www.tech-assist.org/secure/tip/main.html > > ------------------------------------------ > > To REMOVE your email address, click here: > > http://www.tech-assist.org/unsubb.html > > To CHANGE your email address, click here: > > http://www.techassist.net/forms/change.html > > > > > > > > > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html