Does it have 25 volts at the fuse? If not, R467 might be open. Says 27 ohm 2 watt. That might be an error. 2.7 ohms would be more likely. Also check for the vertical pulse at pin 5 of IC402. Comes from IC601. Jerry Silverman Greentron Inc 4 Newland Ave Greenville SC 29609 864 232 3889 Fax 271 2080 mailto:greentron@xxxxxxx ----- Original Message ----- From: "Barddas the Bard" <barddas@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, January 11, 2002 5:36 PM Subject: [TechAssist] Orion verticle problem > > Hello gotta an Orion TVCR 0950 BW in with a solid white line on screen all > else is black. ICP401 (micro fuse)and IC402(verticle deflection) have been > replaced but still has same symptoms any ideas? > > Carl Tierney > > ------------------------------------------ > Help make your TechAssist database better! > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > > ------------------------------------------ Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.