[TechAssist] Re: Need refresher on RCA EEPROM replacing...]
- From: "Phillip R. Hull" <phil245@xxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 23 Jan 2003 09:56:59 -0500
You are right I meant a TAG 001 Or a VG91 which I use. However I think
there is one or two chassis that use chipper check but I have never used CC
for a tuner alignment
Phillip R Hull STET
phil245@xxxxxxxxxxxxx
----- Original Message -----
From: "C&W Electronics" <c_w_electronics@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, January 22, 2003 9:47 PM
Subject: [TechAssist] Re: Need refresher on RCA EEPROM replacing...]
>
> Mr Hull,
>
> RCA tuners are NOT aligned with the CHIPPER CHECKER. It is aligned using
> TAG001 Tuner Alignment Generator!
>
> I shutter to see the total lack of knowledge of the operation of the
eeprom
> and cpu in the RCA TV.
>
> Paul W
> C&W Electronics
> Azle Texas
>
>
> ----- Original Message -----
> From: "Phillip R. Hull" <phil245@xxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Wednesday, January 22, 2003 2:51 PM
> Subject: [TechAssist] Re: Need refresher on RCA EEPROM replacing...]
>
>
> >
> > Once and for all( I hope), these IC's are not preprogramed, they are
set
> > with average values, also the tuner will have to be realigned with
Chipper
> > Check, unless you can write down all the tuner parameters before
> replacing.
> > Phillip R Hull STET
> > phil245@xxxxxxxxxxxxx
> > ----- Original Message -----
> > From: "Kevin" <kevintv@xxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Wednesday, January 22, 2003 3:31 PM
> > Subject: [TechAssist] Re: Need refresher on RCA EEPROM replacing...]
> >
> >
> > >
> > > Sometimes the data is corrupted. Then your only option is to get a
> > > preprogrammed eeprom. They are available form Main Electronics in
> > > Vancouver BC Canada. 250-872-0267 Ask for Mike or Daniel. You may
> > > still have to adjust the tuner parameters to get a good picture on all
> > > channels.
> > >
> > > Kevin Wilks
> > > Kevin's TV & Video Repair
> > > Penticton BC Canada
> > > kevintv@xxxxxxx
> > >
> > >
> > > -----Original Message-----
> > > From: techassist-bounce@xxxxxxxxxxxxx
> > > [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Philip Bader
> > > Sent: Wednesday, January 22, 2003 6:04 AM
> > > To: techassist@xxxxxxxxxxxxx
> > > Subject: [TechAssist] Re: Need refresher on RCA EEPROM replacing...]
> > >
> > >
> > > Not to drag this on,but I remember trying this.Probably didn't do the
> > > right sequence,but all I managed to do was transfer the old corrupt
> > > parameters to the new "blank" chip,so now I have two exact chips with
> > > corrupt data.
> > > How does it transfer the "good" data without also the bad?
> > > Phil Bader
> > >
> > > Jeff Dougherty wrote:
> > > >
> > > > Harlan,
> > > > Place old EEPROM in socket, turn set on, replace old EEPROM with new
> > > one.
> > > > I have had luck with ordering the correct EEPROM for the specific
> > > chassis and all
> > > > I have to adjust, if anything, is the horizontal freq.
> > > > support@xxxxxxxxxxxxxxxxxx
> > > > FAX 717-564-4952
> > > > Jeff Dougherty
> > > > Intrepid Video & Electronics Be careful of your thoughts.
> > > > 501 Luther Rd They may become your words
> > > > Harrisburg, PA 17111 any moment.
> > > > 717-909-8844
> > > > VCR tips, electronics info & general interest.
> > > > www.intrepid-video.com www.tech-repair.net
> > > > www.thetoolcaddy.com www.9-11-2001tragedy.com
> > > >
> > >
***********************************************************************
> > > >
> > > > ----- Original Message -----
> > > > From: "Philip Bader" <tjanphyl@xxxxxxxxxxxxxxx>
> > > > To: <techassist@xxxxxxxxxxxxx>
> > > > Sent: Tuesday, January 21, 2003 10:57 AM
> > > > Subject: [TechAssist] Need refresher on RCA EEPROM replacing...]
> > > >
> > > > I forwarded this to the group for a tech. PLease help.
> > > > Phil Bader
> > > > Hi,
> > > > Have here an RCA CTC 177 and suspect bad eeprom chip as the set
will
> > > > not power on and have check all the ususal "stuff" ... standby
> > > > supplies, etc.
> > > >
> > > > Question is... was there a procedure when putting in the new eeprom
> > > > where you put in a socket also and then can extract the parameters
> > > > yet from the "bad" one so as not to have to do an entire alignment?
> > > >
> > > > If there is such a process, what were the steps?
> > > >
> > > > Thanks,
> > > > Harlan
> > > >
> > > > ------------------------------------------
> > > > Submit A Repair Tip For Everyone Here:
> > > > http://www.tech-assist.org/secure/tip/main.html
> > > > ------------------------------------------
> > > > To REMOVE your email address, click here:
> > > > http://www.tech-assist.org/unsubb.html
> > > > To CHANGE your email address, click here:
> > > > http://www.techassist.net/forms/change.html
> > > >
> > > > ------------------------------------------
> > > > Submit A Repair Tip For Everyone Here:
> > > > http://www.tech-assist.org/secure/tip/main.html
> > > > ------------------------------------------
> > > > To REMOVE your email address, click here:
> > > > http://www.tech-assist.org/unsubb.html
> > > > To CHANGE your email address, click here:
> > > > http://www.techassist.net/forms/change.html
> > >
> > > --
> > > Philip Bader
> > > Jan Phyl TV Inc. (estab. 1976)
> > > 3420 Recker Hwy. Winter Haven, Fl. 33880
> > > Fax (863) 299-8821
> > > email: tjanphyl@xxxxxxxxxxxxxxx
> > >
> > > ------------------------------------------
> > > Submit A Repair Tip For Everyone Here:
> > > http://www.tech-assist.org/secure/tip/main.html
> > > ------------------------------------------
> > > To REMOVE your email address, click here:
> > > http://www.tech-assist.org/unsubb.html
> > > To CHANGE your email address, click here:
> > > http://www.techassist.net/forms/change.html
> > >
> > > ------------------------------------------
> > > Submit A Repair Tip For Everyone Here:
> > > http://www.tech-assist.org/secure/tip/main.html
> > > ------------------------------------------
> > > To REMOVE your email address, click here:
> > > http://www.tech-assist.org/unsubb.html
> > > To CHANGE your email address, click here:
> > > http://www.techassist.net/forms/change.html
> > >
> > >
> > >
> >
> > ------------------------------------------
> > Submit A Repair Tip For Everyone Here:
> > http://www.tech-assist.org/secure/tip/main.html
> > ------------------------------------------
> > To REMOVE your email address, click here:
> > http://www.tech-assist.org/unsubb.html
> > To CHANGE your email address, click here:
> > http://www.techassist.net/forms/change.html
> >
> ------------------------------------------
> Submit A Repair Tip For Everyone Here:
> http://www.tech-assist.org/secure/tip/main.html
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.techassist.net/forms/change.html
>
>
>
------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
Other related posts:
