And the insulation on the HV wire used to fail where it passed through the swivel. Russ Hoyt Hoyt's TV Exeter, NH ----- Original Message ----- From: "tvservice" <tvservice@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, September 29, 2004 2:42 PM Subject: [TechAssist] Re: Need IF Module for OLD Mag T995 chassis > I've worked on two of those Predicta replica's > The detail to original is very good, I was impressed, but I remember how > lousy the vertical sync was on the originals. > Both sets I worked on were RCA CTC177 chassis with 25 inch crt's > All knobs of course are dummies everything done with remote, IR unit hidden > behind center of knob on the pedestal model. > Robert > tvservice@xxxxxxxxxxxxx > H & H Electronics Inc > ----- Original Message ----- > From: "Hoyt's TV" <hoytstv@xxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Wednesday, September 29, 2004 1:22 PM > Subject: [TechAssist] Re: Need IF Module for OLD Mag T995 chassis > > > > I worked for a Philco dealer when those came out. > > Predicta was a Philco model, I don't know how they can claim it as a > > registered trade name. > > Of course they were all B&W in the mid 50s so they must be building > replicas > > with color. > > > > > > > > Russ Hoyt > > Hoyt's TV > > Exeter, NH > > > > > > ----- Original Message ----- > > From: "Old TV Man" <mebonnell@xxxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Wednesday, September 29, 2004 1:53 PM > > Subject: [TechAssist] Re: Need IF Module for OLD Mag T995 chassis > > > > > > > John - I remember working on TV''s with the tube mounted on top (like he > > > ones posted in the website). I can't remember the brand. > > > > > > Speaking of old I have a 1977 Panasonic in the shop. Luckily I also had > > > the SAMS. > > > > > > Max Bonnell > > > Bonnell TV > > > Robinson, IL > > > > > > > > > Sender: techassist-bounce@xxxxxxxxxxxxx From: > > > myers_tv@xxxxxxxxxxxxx(John=A0Myers) Date: Wed, Sep 29, 2004, 7:21am > > > (CDT+1) To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: Need IF > > > Module for OLD Mag T995 chassis Reply=A0to: techassist@xxxxxxxxxxxxx > > > > > > Al, I know that isn't what you meant, but I had to share this link. > > > > > > =A0=A0http://www.predicta.com/index.shtml > > > > > > John Myers > > > Myers TV Service =A0 =A0 =A0 Since 1984 > > > Alliance, OH > > > ph 330-821-6545 > > > myers_tv@xxxxxxxxxxxxx > > > www.myerstv.net > > > > > > ----- Original Message ----- > > > From: "al m" <ampm@xxxxxxx> > > > To: <techassist@xxxxxxxxxxxxx> > > > Sent: Tuesday, September 28, 2004 11:00 PM > > > Subject: [TechAssist] Re: Need IF Module for OLD Mag T995 chassis > > > > > > Don't want to get off topic here but I think if someone came out with a > > > good TV like they used to be for more money I would buy one. What do the > > > rest of you think? > > > > > > Al Marquardt > > > ampm@xxxxxxx > > > Al Marquardt Electronic Repair > > > 206 W Main > > > Girardville Pa. 17935 > > > > > > ----- Original Message ----- > > > From: "Al Gutz" <alg@xxxxxxxxxxx> > > > To: <techassist@xxxxxxxxxxxxx> > > > Sent: Tuesday, September 28, 2004 10:52 PM > > > Subject: [TechAssist] Re: Need IF Module for OLD Mag T995 chassis > > > > > > Whats with all the antiques lately. A Philps older than a modular 4 and > > > last week Russ was fixing a Zenith that was old enough that it likely > > > still used tubes. They don't build them like that any more. > > > > > > Al G > > > Als TV-Electronics > > > Pembroke Ont. > > > Canada > > > al m wrote: > > > > > > Thanks then I can't help. I have some old chassis but not that old. Al > > > Marquardt > > > ampm@xxxxxxx > > > > > > Al Marquardt Electronic Repair > > > 206 W Main > > > Girardville Pa. 17935 > > > > > > ----- Original Message ----- > > > From: "John @ Myers TV" <myers_tv@xxxxxxxxxxxxx> > > > To: <techassist@xxxxxxxxxxxxx> > > > Sent: Tuesday, September 28, 2004 9:57 AM > > > Subject: [TechAssist] Re: Need IF Module for OLD Mag T995 chassis > > > > > > Al, > > > > > > That was a Magnavox 25" chassis, which was produced between 1974 - 1978. > > > It had the motherboard which would swing back, for module servicing. > > > Actually a pretty good design. > > > > > > John Myers > > > Myers TV Service =A0 =A0 =A0 Since 1984 > > > Alliance, OH > > > ph 330-821-6545 > > > myers_tv@xxxxxxxxxxxxx > > > www.myerstv.net > > > > > > ----- Original Message ----- > > > From: "al m" <ampm@xxxxxxx> > > > To: <techassist@xxxxxxxxxxxxx> > > > Sent: Tuesday, September 28, 2004 9:39 AM > > > Subject: [TechAssist] Re: Need IF Module for OLD Mag T995 chassis > > > > > > T995 chassis I never heard of , How old is it? Is it a PTV? Al Marquardt > > > > > > ampm@xxxxxxx > > > Al Marquardt Electronic Repair > > > 206 W Main > > > Girardville Pa. 17935 > > > > > > ----- Original Message ----- > > > From: "John @ Myers TV" <myers_tv@xxxxxxxxxxxxx> > > > To: <techassist@xxxxxxxxxxxxx> > > > Sent: Tuesday, September 28, 2004 8:55 AM > > > Subject: [TechAssist] Need IF Module for OLD Mag T995 chassis > > > > > > Hi, > > > I'm looking for a 703636-3 IF module. > > > It was used in the Magnavox T995 chassis. NOS, or working pull is fine. > > > Please e-mail privately with price. > > > Thanks, > > > > > > John Myers > > > Myers TV Service =A0 =A0 =A0 Since 1984 > > > Alliance, OH > > > ph 330-821-6545 > > > myers_tv@xxxxxxxxxxxxx > > > www.myerstv.net > > > ---------------------------------------------- > > > -- > > > --- > > > > > > > > > > -------------------------------------------------------------------------- > > --- > > > Lost Password: > > > http://www.tech-assist.org and select "Login Problems?". > > > Email Archives: > > > //www.freelists.org/archives/techassist/ > > > > > > > > > > > -------------------------------------------------------------------------- > --- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/