Ron, I have two paper schematics for the 7496 manual but the vert. circuits appear to be the same on both. I can scan the vert. circuit and the wave forms to go with it. Russ Hoyt Hoyt's TV Exeter, NH ----- Original Message ----- From: "Ron Miller d.b.a. Country TV" <rlmbkm@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, November 21, 2005 6:39 PM Subject: [TechAssist] NAP PTV375 (7496) not in "Force"need vert section > Have an older ptv 375 made for Sears by Magnavox manual # 7496 on paper > only. > Need scan of vert output section, after replacing PLL ic in tuner now I > have sound no pix NO VERT.Have checked for missing smd , cracked trace - > lose connectors ETC.. > Do have ramp from IC 200 (jungle) to output IC tda8174 have 29vdc to vert, > scope the yoke and see vert pulse for an instant then nothing.Have > replaced > vert output ic twice and jungle once getting nowhere, anyone have scan or > tips?Ohm & ESR meter and o'scope have had a workout on this old dog.tia > > Country TV > Ron Miller > Inez, TX. 77968 > > ----------------------------------------------------------------------------- > This Email List is accessible to the general public through search > engines. Remove: http://www.tech-assist.org/remove.htm > Set Vacation > mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/