Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Sounds like a bad lower cylinder unit to me, have you tried giving it a s= pin by hand as the tape loads to help it get started? It may start up and pla= y ok with a little push, if it does then replace the lower cylinder assy.=0D =0D Jim Myers=0D Since 1972=0D Telrad Electronic Service Co=0D Fort Wayne, IN 46815=0D 260-432-4486 Fax and Voice=0D -------Original Message-------=0D =0D From: techassist@xxxxxxxxxxxxx=0D Date: Wednesday, November 27, 2002 3:48:04 PM=0D To: techassist@xxxxxxxxxxxxx=0D Subject: [TechAssist] Re: More Info-PV-M2048, Cyl does not spin-up jerks.= TV ok.=0D =0D All caps in P/S and cyl drive circuit pcb test good,this is a 20in combo=0D made in '98Chasis KM208.=0D Country TV=0D Ron Miller=0D 484 FM444 S.=0D Inez,TX 77968-5002=0D V.(361)782-6419. F.(361)782-9149=0D e-mail: rlmbkm@xxxxxxxx=0D =0D ----- Original Message -----=0D From: "Ron Miller" <rlmbkm@xxxxxxxx>=0D To: <techassist@xxxxxxxxxxxxx>=0D Sent: Wednesday, November 27, 2002 1:36 PM=0D Subject: [TechAssist] PV-M2048, Cyl does not spin-up jerks.TV ok.=0D =0D =0D >=0D > The head tries to spin but jerks,motor itself spins free by hand.Can't=0D find=0D > info on AN3809K looked on Goggle and Panasonic, no print any tips or=0D > datasheets?tia=0D > Country TV=0D > Ron Miller=0D > 484 FM444 S.=0D > Inez,TX 77968-5002=0D > V.(361)782-6419. F.(361)782-9149=0D > e-mail: rlmbkm@xxxxxxxx=0D >=0D >=0D >=0D > ------------------------------------------=0D > To REMOVE your email address, click here:=0D > http://www.tech-assist.org/unsubb.html=0D > To CHANGE your email address, click here:=0D > http://www.techassist.net/forms/change.html=0D > ------------------------------------------=0D > ***NEW*** Tips Added Instantly!!!***=0D > Submit Repair Tips here:=0D > http://www.tech-assist.org/secure/tip/=0D >=0D >=0D >=0D =0D =0D ------------------------------------------=0D To REMOVE your email address, click here:=0D http://www.tech-assist.org/unsubb.html=0D To CHANGE your email address, click here:=0D http://www.techassist.net/forms/change.html=0D ------------------------------------------=0D ***NEW*** Tips Added Instantly!!!***=0D Submit Repair Tips here: =0D http://www.tech-assist.org/secure/tip/=0D =2E=20 ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/