Blue adjust is perfect- red vertical is perfect- red horizontal has no effect at all. Red is shifted about 1 and 1/2 inches left horizontally and will not adjust. Replaced convergence ic's twice with no change, also filters in convergence circuit. All the resistors have been checked out of circuit and all are perfect. This is a digitally converged unit and by going into memory there still is no change horizontally. + & - voltages are correct all over the circuit. I'm beginning to think maybe the digital board has a problem but have found nothing wrong there as yet. Suggestions or help please?! Thanks from Mike at the Video Center. My e-mail is ttkirkpat@xxxxxxx ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html