1994 VZ2 chassis, to access MENU 23595. (Or is it 2359 only? ) Enter switches from RED to Blue. Video selects adjustment type Hwid = width Vwid = Vert height Hlin = linearity\ Vlin = Vert linearity HSDL = horiz left side HSDR = right side Adjust up/down buttons adjust VKLU =Vert Keystone Left UPPER VKRU= Vert Key Right Upper VKLL = Vert Keystone LEFT LOWER VKRL =Vert Key Right Lower These move the horiz lines up/down in each quadrant, and the Horiz Keystone are the same coding, except they start with H...... MENU/MENU to exit. Automatic save. HTH Damon Brunger damon101@xxxxxxxxxxxxxx Telrad Electronic Services Ft Wayne, IN 46815 ----- Original Message ----- From: <Ttkirkpat@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, November 14, 2002 12:29 AM Subject: [TechAssist] Mitsubishi model VS5052- convergence assist > > Just need to touch up the outer red horizontal. I assume this is done through > menu/memory access but I do not have the service literature on this unit. > Thanks to anyone who can walk me through this set-up. Mike at the Video > Center. My e-mail is ttkirkpat@xxxxxxx > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/