Check .p.c. brd connections on blue, green,red yokes, from convergence board ..(4 pin connectors), resolder connections' blue,green,red.. Repaired one last week similar symtom.. hth Bill Bill'sTV Sonora,Calif. repair11 <repair11@xxxxxxx> wrote: I pulled lightbox, at customers home set has no raster, unless you turn g2s up, I turned up blue g2 and and have a vertically shortened blue raster which is rounded on corners like an ellipse, also retrace lines that curve arouns like a lisajous pattern, have checked for and can not find any trace of coolant leak, also no audio, if some has scan of print, or a suggestion, I would greatly appreciate it. Charles Betzler Best Electronics repair11@xxxxxxx ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ Carol Rundle brundle@xxxxxxxxxxxxx ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/