On the large main signal board, replaced all the regulators on the common heat sink: # on parts: SI3120C (12V), SI3090C (9V), SI3050C (5V). The 12Volt reg was shorted dead. Replaced others as precaution. Now set powers up with filaments and HV.Advance G2 , look down the CRT's and see a slick raster with no OSD,Sound or video. This has been a project in patience awaiting the parts orders. Running out of time. Anyone have a PDF of this unit? A manual for this older unit? I assume it's a video problem at this point.Or a missing voltage at least. I'm blind without a schemo- Customer needs to wrap up this insurance claim soon.Thanks in advance, Phil Bader -- Philip Bader Jan Phyl TV Inc. (estab. 1976) 3420 Recker Hwy. Winter Haven, Fl. 33880 Fax (863) 299-8821 email: philbad@xxxxxxxxxx ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/