I'd think you'd still get a full raster if sweep was at 100% Is the image you see only 12" but the raster full screen? Jeff Stielau Shoreline Electronics Repair 125 Beechtree Lane Westbrook,CT 06498 860-399-1861 Voice 860-664-3535 Fax jstielau@xxxxxxxx ----- Original Message ----- From: "Ben Daniels" <benstv@xxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, September 12, 2001 12:56 PM Subject: [TechAssist] Re: Mitsubishi No sound dim small pix > > HV ok drive ok h/o 125v all sweep dirived volts ok I am thinking this maybe > av bd. whats your thought. Ben > ----- Original Message ----- > From: "Shoreline Electronics" <jstielau@xxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Wednesday, September 12, 2001 10:14 AM > Subject: [TechAssist] Re: Mitsubishi No sound dim small pix > > > > > > What is your 2nd anode voltage? > > > > Sounds like low horz drive or low B+ to the HOT. > > > > Jeff Stielau > > Shoreline Electronics Repair > > 125 Beechtree Lane > > Westbrook,CT 06498 > > 860-399-1861 Voice > > 860-664-3535 Fax > > jstielau@xxxxxxxx > > > > ----- Original Message ----- > > From: "Ben Daniels" <benstv@xxxxxxxxxxxxxxxx> > > To: "techassist" <techassist@xxxxxxxxxxxxx> > > Sent: Wednesday, September 12, 2001 10:54 AM > > Subject: [TechAssist] Mitsubishi No sound dim small pix > > > > > > > > > > Mod; CK-31304 Unit has no pix untill you turn screen all the way up then > > it > > > is dim and small 12" sq. also no sound. You can see faint pic and see > that > > > it changes channels. Have run block flow chart and all voltages are ok. > > > There is video bd. that is upright on main chassis changed it no > > difference. > > > Would someone have had this before maybe? Steer me in the right > direction. > > > Tia Ben > > > > > > Help make your TechAssist online repair tips > > > database better! Submit your fixes here: > > > http://www.circuitwork.com/techassist/tip/#tips > > > To unsubscribe write to: > > > techassist-request@xxxxxxxxxxxxx > > > with unsubscribe in the subject line. > > > > > > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.