[TechAssist] Re: Mitsubishi Model cs-26301 FIXED ! PIP module
- From: "Shoreline Electronics" <jstielau@xxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sat, 13 Oct 2001 17:22:49 -0400
You'll see many of these.
If you kept the PIP module....remove that VP connector & make a plug in
bypass assembly for the future.
Jeff Stielau
Shoreline Electronics Repair
125 Beechtree Lane
Westbrook,CT 06498
860-399-1861 Voice
860-664-3535 Fax
jstielau@xxxxxxxx
----- Original Message -----
From: "Mike Barnett" <passthecash@xxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Saturday, October 13, 2001 4:30 PM
Subject: [TechAssist] Re: Mitsubishi Model cs-26301 FIXED ! PIP module
>
> THANKS Jeff for all the help. Fixed and shiiped.This is a good one.
>
> Mike
>
> On Sat, 13 Oct 2001 10:08:59 -0400, techassist@xxxxxxxxxxxxx wrote:
>
> >
> > Oh yeah....after the mod....leave the PIP out!
> >
> > Save the PIP & clip the VP plug and make yourself a test plug for
future
> > repairs on these!
> >
> > Jeff Stielau
> > Shoreline Electronics Repair
> > 125 Beechtree Lane
> > Westbrook,CT 06498
> > 860-399-1861 Voice
> > 860-664-3535 Fax
> > jstielau@xxxxxxxx
> >
> > ----- Original Message -----
> > From: "Mike Barnett" <passthecash@xxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Saturday, October 13, 2001 7:32 AM
> > Subject: [TechAssist] Re: Mitsubishi Model cs-26301 PIP module
> >
> >
> > >
> > > Jeff, thanks ALOT! This is great info. could you elaborate a bit
more,
> pin
> > 7
> > > to pin 9 you say install .01 is this a resistor? if so at what
> wattage(1/8
> > > 1/4 1/2??) or doesn't it matter? should i modify the main board and
> leav
> > the
> > > pip out or do the mod on the pip mod and re-install?
> > > Thanks again
> > > Mike
> > >
> > >
> > >
> > >
> > >
> > > On Fri, 12 Oct 2001 19:34:51 -0400, techassist@xxxxxxxxxxxxx wrote:
> > >
> > > >
> > > > Mike,
> > > >
> > > > If the customer never uses the PIP it's best to bypass the
> board....it
> > > may
> > > > cause more problem years from now.
> > > >
> > > > Here's the bypass procedure :
> > > >
> > > > Remove "Vp" Plug From Pip Mod.Install .01 From Pin 7 To Pin 9
> Install
> > > > 4.7/35-50v;Pos.To Pin 5,Neg. To Pin 11
> > > >
> > > > If it's a set we have on the bench , I'll solder the 2 parts on
the
> > > bottom
> > > > of the chassis instead of having to remove the plug from the PIP.
> > > >
> > > > We do keep a VP plug all ready to go in our service kit for a
> quick
> > > bypass
> > > > check in the field or on the bench.
> > > >
> > > > Jeff Stielau
> > > > Shoreline Electronics Repair
> > > > 125 Beechtree Lane
> > > > Westbrook,CT 06498
> > > > 860-399-1861 Voice
> > > > 860-664-3535 Fax
> > > > jstielau@xxxxxxxx
> > > >
> > > > ----- Original Message -----
> > > > From: "Mike Barnett" <passthecash@xxxxxxxxxx>
> > > > To: <techassist@xxxxxxxxxxxxx>
> > > > Sent: Friday, October 12, 2001 2:42 PM
> > > > Subject: [TechAssist] Mitsubishi Model cs-26301 PIP module
> > > >
> > > >
> > > > >
> > > > > Anyone know a good source for the pip module in model# cs-26301.
> > > > > PIP module # P12187258. this unit has loss of vertical hold
after
> on
> > > about
> > > > 5
> > > > > min. Pulled pip mod and has leaky smd caps all over it with
> > > contaminated
> > > > > traces. Dont want to even try to rebuild. any help would be
great.
> > > > >
> > > > > Thanks,
> > > > > Mike
> > > > >
> > > > >
> > > > > Get It Fixed At
> > > > > Rochester Electronics
> > > > > 630 West Ridge Rd.
> > > > > Rochester, NY 14615
> > > > > 716.663.6870
> > > > > www.RochesterElectronicsRepair.com
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > _______________________________________________________
> > > > > Send a cool gift with your E-Card
> > > > > http://www.bluemountain.com/giftcenter/
> > > > >
> > > > >
> > > > > Help make your TechAssist online repair tips
> > > > > database better! Submit your fixes here:
> > > > > http://www.circuitwork.com/techassist/tip/#tips
> > > > > To unsubscribe write to:
> > > > > techassist-request@xxxxxxxxxxxxx
> > > > > with unsubscribe in the subject line.
> > > > >
> > > >
> > > > Help make your TechAssist online repair tips
> > > > database better! Submit your fixes here:
> > > > http://www.circuitwork.com/techassist/tip/#tips
> > > > To unsubscribe write to:
> > > > techassist-request@xxxxxxxxxxxxx
> > > > with unsubscribe in the subject line.
> > >
> > >
> > > Get It Fixed At
> > > Rochester Electronics
> > > 630 West Ridge Rd.
> > > Rochester, NY 14615
> > > 716.663.6870
> > > www.RochesterElectronicsRepair.com
> > >
> > >
> > >
> > >
> > >
> > > _______________________________________________________
> > > Send a cool gift with your E-Card
> > > http://www.bluemountain.com/giftcenter/
> > >
> > >
> > > Help make your TechAssist online repair tips
> > > database better! Submit your fixes here:
> > > http://www.circuitwork.com/techassist/tip/#tips
> > > To unsubscribe write to:
> > > techassist-request@xxxxxxxxxxxxx
> > > with unsubscribe in the subject line.
> > >
> >
> > Help make your TechAssist online repair tips
> > database better! Submit your fixes here:
> > http://www.circuitwork.com/techassist/tip/#tips
> > To unsubscribe write to:
> > techassist-request@xxxxxxxxxxxxx
> > with unsubscribe in the subject line.
>
>
> Get It Fixed At
> Rochester Electronics
> 630 West Ridge Rd.
> Rochester, NY 14615
> 716.663.6870
> www.RochesterElectronicsRepair.com
>
>
>
>
>
> _______________________________________________________
> Send a cool gift with your E-Card
> http://www.bluemountain.com/giftcenter/
>
>
> Help make your TechAssist online repair tips
> database better! Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with unsubscribe in the subject line.
>
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
Other related posts:
