From Tech repair CD: MITSUBISHI\CS35301\VERT JITTER/HORZ UNSTABLE\\\\CHECK 'VP' CONNECTOR PIN 5 FOR 1VPP Y SIGNAL INTO PIP PCB\THEN CHECK 'VP' CONNECTOR PIN 11 FOR 1VPP Y SIGNAL FROM PIP PCB\IF SIGNAL AT PIN 5 IS GOOD AND PIN 11 IS CLIPPED OR REDUCED.\CHECK ALL ELECTROLYTICS (I.E.C7001-C7014-C7026-C7036) AND ALL CONNECTING TRACES TO THESE CAPS FOR CONTINUITY\\\\\ Phil Bader Philip Bader Jan Phyl TV Inc. (estab. 1976) 3420 Recker Hwy. Winter Haven, Fl. 33880 Fax (863) 299-8821 email: tjanphyl@xxxxxxxxxxxxxxx Thomas Woodward wrote: >Hi >I have a Cs-35301 with a rolling vertical I thought it was the Pip so I >replaced all the smd's >Unfortunately it did not solve anything . >Any suggestions >Thanks >Tom > > > -- ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/