listen up! these sets have bad connections at the yokes on the plugs,,whatch out...i've posted this before but don't know if anyone else has seen this problem Shoreline Electronics wrote: > This is true...but some V10's have what is called a CM kit installed to > prevent a line from burning in the CRTS when the vert. circuit fails....I > was curious if when it is installed & the Vertical circuit fails , will it > only kill the High Tension & keep the rest of the set running. > > I know without the mod it does shut the whole set down........just wondered > if it changes this with the kit. > > Jeff Stielau > Shoreline Electronics Repair > 125 Beechtree Lane > Westbrook,CT 06498 > 860-399-1861 Voice > 860-664-3535 Fax > jstielau@xxxxxxxx > > ----- Original Message ----- > From: "tom lee" <t8872695@xxxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Wednesday, October 03, 2001 6:12 AM > Subject: [TechAssist] Re: Mitsubishi CM Kit Question > > > > > Hi Jeff. > > I think vertical circuit failing will make triger the protect(xray) and > the > > micro control will > > shut down the power supply except the low voltage 5V still work for micro > > control. > > many Mit big screen have this . > > good luck Dang TVCR > > -----Original Message----- > > From: Shoreline Electronics <jstielau@xxxxxxxx> > > To: techassist@xxxxxxxxxxxxx <techassist@xxxxxxxxxxxxx> > > Date: Wednesday, October 03, 2001 1:45 AM > > Subject: [TechAssist] Mitsubishi CM Kit Question > > > > > > > > > >Question : > > > > > > With a CM kit installed on a V10/V10B chassis , if the vertical circuit > > >fails , will the audio still stay on OR will it still shut the whole set > > >down? > > > > > >Reason I ask is we just did a VS6015R today where the set would do > exactly > > >that...lose video & OSD ( Not sure if HV or filaments went out...we just > > >tore into it). > > > > > >We pulled all 3 boards & resoldered all the usual stuff that gets charred > & > > >replaced all the usual caps we always do......set ran for a couple hours > > >then quit. This set is at customers house so we'll have to go back & do > > >battle again. > > > > > >I'll check for HV & filaments when this happens. > > > > > > > > > > > >Jeff Stielau > > >Shoreline Electronics Repair > > >125 Beechtree Lane > > >Westbrook,CT 06498 > > >860-399-1861 Voice > > >860-664-3535 Fax > > >jstielau@xxxxxxxx > > > > > >----- Original Message ----- > > >From: "Shoreline Electronics" <jstielau@xxxxxxxx> > > >To: "TV Repair Group" <tv-repair@xxxxxxxxxxxxxxx> > > >Sent: Tuesday, October 02, 2001 9:50 PM > > >Subject: Mitsubishi CM Kit Question > > > > > > > > >> Question : > > >> > > >> With a CM kit installed on a V10/V10B chassis , if the vertical > circuit > > >> fails , will the audio still stay on OR will it still shut the whole > set > > >> down? > > >> > > >> Reason I ask is we just did a VS6015R today where the set would do > > exactly > > >> that...lose video & OSD ( Not sure if HV or filaments went out...we > just > > >> tore into it). > > >> > > >> We pulled all 3 boards & resoldered all the usual stuff that gets > charred > > >& > > >> replaced all the usual caps we always do......set ran for a couple > hours > > >> then quit. This set is at customers house so we'll have to go back & do > > >> battle again. > > >> > > >> I'll check for HV & filaments when this happens. > > >> > > >> > > >> Jeff Stielau > > >> Shoreline Electronics Repair > > >> 125 Beechtree Lane > > >> Westbrook,CT 06498 > > >> 860-399-1861 Voice > > >> 860-664-3535 Fax > > >> jstielau@xxxxxxxx > > >> > > >> > > > > > >Help make your TechAssist online repair tips > > >database better! Submit your fixes here: > > >http://www.circuitwork.com/techassist/tip/#tips > > >To unsubscribe write to: > > >techassist-request@xxxxxxxxxxxxx > > >with unsubscribe in the subject line. > > > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.