[TechAssist] Mitsubishi CK3530R clicks only,fixed? kithz40/35?
- From: Phil Bader <tjanphyl@xxxxxxxxxxxxxxx>
- To: "techassist@xxxxxxxxxxxxx" <techassist@xxxxxxxxxxxxx>
- Date: Thu, 19 Feb 2004 17:32:39 -0500
This 35" mits would only click.
I found HOT Q532 (2SD1879) shorted.
Also several smps electrolytics leaking fluid:
C928 (1000/50v
C914 (470/35V)
Replaced caps, HOT, cleaned board, resoldered H. drive transformer
(looked ok).
Unit powers up with good picture now
. HOT running cool..
Qeustion: in a post I found from Winstips pasted by another tech it
mentions if HOT shorts, install this "# Kithz40/35" What's that kit?
see below: Granted, this is for another model...
Phil Bader
---------------------------------------------------------------
Text pasted from WinSTIPS 2.0
http://www.ServiceSoftware.com
---------------------------------------------------------------
MITSUBISHI CS40503
Horizontal Q532 Fails Z501 Opens
>From Mitsubishi
Install Kithz40/35.Q532 And Z501 Are Enclosed In The Kit.
---------------------------------------------------------------
MITSUBISHI CS40503
Horizontal Repeated Failure Of Q532
>From Mitsubishi
Repeated Failure Of Q532 After Kithz40/35 Has Been Installed.Check The
Following Components To Be Either Leaky Or Open.R533(15k 1/4w),
C532(680pf
500v) And C539(1uf 200v),Located On The Defl-Pcb.
--
Philip Bader
Jan Phyl TV Inc. (estab. 1976)
3420 Recker Hwy. Winter Haven, Fl. 33880
Fax (863) 299-8821
email: tjanphyl@xxxxxxxxxxxxxxx
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
