B+ running to high ? check voltage level at the caps that blew!!! Adolph Gower Cordova TV 10275 Old Placerville Rd. #5 Sacramento, Ca. 95827 (916) 363-6565 ----- Original Message ----- From: "markbrock" <markbrock@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: 2003Äê12ÔÂ1ÈÕ 18:35 Subject: [TechAssist] Mitsubishi C4A29 blown > PTV MOdel VS4517S customer said had a high pitch squeel, fired it up and > saw C4A29 bulge and smoke, replaced it and checked all around Q4A02, 03, 05 > all ok, diodes in area ok, fired it up , and the cap blew again, this > time shorting Q4A02, and 03, replaced them both and Q4A05, C4A29, and > 4A25 ( from tips ) now I'm a little gun shy about fireing it up agian, > anything else I need to check, would the fbt cause this ? can't ring it, > was wondering if the Q's were weak ? appreciate any help, I've no print > brock > Brock Electronics > R.R.4 box 237 > 5208 cr.3385 > Independence Ks. 67301 > 620-331-0235 > fax 331-7191 > > markbrock@xxxxxxxxxxxxx > Zenith*Philips*Peavey*Fender*Crate > we work on all brands,makes,models > of anything that plugs in the wall > > **************************************************************************** * > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/