Is checking .164 in ONE direction? Thats the important thing! If so, and open the other way,it's OK. Maybe some small electrolytic caps in the PS bad. Phil Bader al m wrote: > > This thing works but in standby the switch mode is buzzing. Found 6V on the > input to 5V regulator. Disconnected regulator and get 11V. Replaced regulator > and same thing.Can anyone tell the part numbers for these diodes D631, D611, > D612. These are checking .164 on the diode scale. Don't know if that is right > or they are leaky. Need to know what to replace them with. Can't find any > crosses for the numbers. Strange that it would work like this. > al marquardt > ampm@xxxxxxx > Al Marquardt Electronic Repair > 206 W Main > Girardville Pa. 17935 > ***************************************************************************** > The Tech Address Book: > http://www.tech-assist.org/secure/tip/contact.html > Add a Repair Tip Here, or Change/Remove your Email Address: > http://www.tech-assist.org/secure/tip/main.htm > Lost Password: > http://www.tech-assist.org and select "Lost your Login Info?". > Email Archives: > //www.freelists.org/archives/techassist/ -- Philip Bader Jan Phyl TV Inc. (estab. 1976) 3420 Recker Hwy. Winter Haven, Fl. 33880 Fax (863) 299-8821 email: tjanphyl@xxxxxxxxxxxxxxx ***************************************************************************** The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.html Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/