Thanks I did inspect the yoke and didn't see any brake but I have another yoke I will try see what happens thanks Ken Dinckan ALL Tv&Appliance Service 2747 Roosevelt Street # B Carlsbad CA, 92008 tel: (760)434-1131 fax: (760)434-8856 email to : kdinckan@xxxxxxx ----- Original Message ----- From: "art bevilacqua" <abevilac@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, February 06, 2002 8:07 PM Subject: [TechAssist] Re: Magnavox tv . RK4910 AK04 no full vertical deflection > > This might be because one half of the yoke (one of the two parallel > windings) is open. If you are lucky, you might be able to see a green > spot in the windings where the break is, and then patch it. > > Art Bevilacqua > Essex Radio and TV > 40 Main Street > Essex, MA 01929 > abevilac@xxxxxxxxxxxxx > > > -----Original Message----- > From: techassist-bounce@xxxxxxxxxxxxx > [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Ken Dinckan > Sent: Wednesday, February 06, 2002 11:01 AM > To: techassist@xxxxxxxxxxxxx > Subject: [TechAssist] Magnavox tv . RK4910 AK04 no full vertical > deflection > > Chassis # 25P1-02 > This set came in with vertical sweep problem but has different shape > then usual vertical problems. It is like bow type screen it is not > straight line on both sides. Replaced the vertical output IC no change. > Check the yoke looks ok.. has anyone worked on this chassis and the > problem > thanks for your time > > Ken Dinckan > ALL Tv&Appliance Service > 2747 Roosevelt Street # B > Carlsbad CA, 92008 > tel: (760)434-1131 > fax: (760)434-8856 > email to : kdinckan@xxxxxxx > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.