first,resolder the H Drive tranformer ALWAYS in a Philips/magnavox. Does it use C432 and/or C431 ???......change both. Peggs At 12:49 PM 5/19/04, Kevin wrote: >I measured the B+ before I installed the HOT by putting a 110 ohm, 30 >watt resistor from collector to ground. The B+ measured 127 volts, and >the STR30130 was ouputting 130.2 volts. Thinking everything was good, I >installed the new HOT (Q502 NTE 2353) and turned the set on. The HV >came up but 'sounded funny', so I quickly turned the TV off and >discovered a totally black fuse and shorted HOT. My flyback rings good. >Could it still be a bad flyback? > >Kevin Wilks >Kevin's TV & Video Repair >Penticton BC Canada >kevintv@xxxxxxx > > > > >----------------------------------------------------------------------------- >Lost Password: >http://www.tech-assist.org and select "Login Problems?". >Email Archives: >//www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/