[TechAssist] Magnavox RJ8550AK03 Cloudy Picture
- From: "Eric Haskins" <ehaskins@xxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sun, 27 Oct 2002 14:41:06 -0500
Hey all,
I just acquired a 52 inch Magnavox RJ8550 and it works well except for
the cloudy picture. Blue & Green have alot of debris in the fluid. It has
been so long since I have drained and cleaned the chambers on one of these
does anyone have a procedure on doing this? Also a good source for the Heat
Transfer Fluid.
Last but not least does anyone have a layout of the convergence board
adjustments on this model?
Thanks
Eric Haskins
Eric Haskins Consulting
A+,CCNA,Linux+,MCSE NT4
Clearwater, FL
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
