Jose, All I have..from Tech Repair CD: Sylvania\SWR4620 PTV520-AH01\No high voltage. Audio OK\\\PTV520-AH01\Replaced shorted Q906 (2sd1556)* Open R934 (.33 ohm) and fly (4835-1406-7128). Noticed a leaking lytic on the top edge of the same defl board: C827 (1000/25V)\\\\\\\\ Jeff -- Intrepid Video TV/VCR Repair 263 S Front St, Steelton PA 17113 717-939-7708; (F) 717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "javiles6" <javiles6@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, May 20, 2004 3:40 AM Subject: [TechAssist] Magnavox Mod# PR3446-A106 (PTV515-AHO1) need help Hello Techs This set came in yesterday with sound but no picture. Found HVOT shorted(D1556)(Q901) but before i install the new one (2SD1556) i check the surrounding parts that connect to the transistor, D910, R961 and L903 and they check good. I also resolder the T901 just to make sure i have no problem. Now the set have High Voltage and the picture tubes filament are lighted but still have no picture. I also check the voltage on the CRT ckt and is 225V on all three CRT resistors. Now i don`t have an high voltage probe so i don`t know if the high voltage is reaching the picture tube anode. Does someone have any idea or tips that can help me with. I`m free to any suggestion. Thanks Jose Aviles Computer & TV Repairs 508 Bingaman st Reading, PA 19602 Tel # 610-478-1342 ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/