Is there coolant still on the tube envelope? If so clean thoroughly and clean and reseal anode boot with RTV Is the ground dag lead properly connected? Robert tvservice@xxxxxxxxxxxxx H & H Electronics Inc ----- Original Message ----- From: <phxmobilbob@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, January 27, 2003 6:56 AM Subject: [TechAssist] Magnavox Mod FP5220, Chas PTV705 Check 130v -b+ and Adjust > > > > Changed fluid in blue tube ,now have arching around ground connection to tube .pulled chas .[sweep/power supply],checked caps[esr]. > checked Mylar type cap for open condition .This is good clean chas but checked for bad solder anyways .Found nothing wrong . > I would like to check for 130v [voltage feeding to HOR section ],and adjust > if to high . I have no manual so appreciate Your help. > Bob Searcy > > Excellent TV > 602 254-1412 > > > > _______________________________________________ > <font size=2 face=geneva><b>Join Excite! - <a href=http://www.excite.com target=_blank>http://www.excite.com</a></b> > The most personalized portal on the Web!</font> > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html