[TechAssist] Re: Magnavox EM3019 K403
- From: "Joe Prokup" <pro501@xxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Tue, 28 Jan 2003 14:05:37 -0600
Thanks for the quick response Bob,I can enter the 062596-menu-but it goes
into the sleep timer mode!Seems it doesn't like the service mode!
Also tried the display button-what am I missing?
Joe Prokup
pro501@xxxxxxxxxxxxx
PRO-ELECTRONICS
501 E Dakota ST
Spring Valley,IL 61362
FAX 815-371-0190
----- Original Message -----
From: "Gemini Computer & TV" <geminitv@xxxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, January 28, 2003 01:07 PM
Subject: [TechAssist] Re: Magnavox EM3019 K403
>
> NOTE: T213AG TRANSMITTERS WITH SOME MODELS (YOU MUST USE DISPLAY BUTTON ON
> SET IN PLACE OF MENU ON TRANSMITTER FOR ENTERING TEST MODE). AFTER
ENTERING
> TEST MODE IT IS NOT POSSIBLE TO CHANGE ANY OF THE REGISTERS OR SCAN
CHANNELS
> WHILE IN THE ADD/DELETE MODE BY USING THE T213AG TRANSMITTER.
>
>
> BY USING A UR12 TRANSMITTER YOU CAN PERFORM ALL TEST FUNCTIONS AS SHOWN
> BELOW.
>
> 1. Press the following transmitter keys without allowing the on screen
> response to time out between entries:
>
>
> 0 - 6 - 2 - 5 - 9 - 6 - MENU
>
> 2. You are now in the service mode. The following is a example of what
> should be displayed on screen and an explanation of the characters.
>
>
> GR3A M1 PRTM C2
>
> 6 C 11 23
>
> TOP LINE
> GR3A = Control System
> C = Consumer, M = Motel, H = Hospital
> 1 = 1st Version of the software
> PRTM = Error Codes.
>
> P = PIP, R = Remote Locator, T = Tuner, M = Memory
>
>
> If a letter appears it indicates failed communication or the set does not
> have these features. These are useful in troubleshooting the control
system.
>
> C2 = Closed Caption Channel
> A/CH Cycles Closed Caption
>
> Status Toggles Info Display = GR3A-Code Type-Error Codes.
>
> BOTTOM LINE
> 6 = Channel Number
> C = Test Mode
> 11 = Register Number
> 23 = Register value in Hex
>
> 3. Channel up/down and number keys will access channels.
>
> 4. Registers can be accessed by number's 80 (1 0) through 93 (23) or by
> cursor up/down keys.
>
> 5. Register values can be changed by pressing the +/- keys.
>
> 6. The registers and their factory preset values are as follows:
>
>
> REGISTER VALUE REGISTER
> DESCRIPTION
> 10 20 Brightness
> 11 20 Picture
> 12 20 Color
> 13 20 Tint
> 14 20 Sharpness
> 15 15 Volume
> 16 05 PIP X1 (position)
> 17 28 PIP X2
> 18 06 PIP D5
> 19 2F PIP Y2
> 20 08 PIP Read Counter
> 21 04 PIP Write Counter
> 22 OA Horizontal Display Offset
> 23 Exit
>
> 7. Ignore the values shown for registers 16 through 21 as these apply only
> to chassis featuring PIP (Picture In a Picture). Neither the D5 or the D6
> chassis covered here incorporate PIP.
>
> 8. To save a register, while still in test mode "C" turn power "OFF" at
the
> television set keyboard. Exiting with the power button on the remote
> transmitter will not save any changes made in the service mode.
>
> Bob Waterman, CET® #RI-28
> Master Technician License #9109
> Service Manager
> Gemini Computer, TV, & Security Alarms
> (508)695-7302
> (508)695-7769 FAX
> geminitv@xxxxxxxxxxxxxxxx
> geminitv@xxxxxxx
>
> ----- Original Message -----
> From: "Joe Prokup" <pro501@xxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Tuesday, January 28, 2003 1:54 PM
> Subject: [TechAssist] Magnavox EM3019 K403
>
>
> > I have two sets that need to be programmed for more channels.I ordered
the
> factory remote for that Model-but it only has the channel
numbers-vol-power.
> > I have tried the 062596/062597 codes-no help.
> > Anyone know how to get into the menu and add channels?
> > Chassis number is 19D501-00BB
> > TIA
> > Joe Prokup
> > pro501@xxxxxxxxxxxxx
> > PRO-ELECTRONICS
> > 501 E Dakota ST
> > Spring Valley,IL 61362
> > FAX 815-371-0190
> >
> > ------------------------------------------
> > Submit A Repair Tip For Everyone Here:
> > http://www.tech-assist.org/secure/tip/main.html
> > ------------------------------------------
> > To REMOVE your email address, click here:
> > http://www.tech-assist.org/unsubb.html
> > To CHANGE your email address, click here:
> > http://www.techassist.net/forms/change.html
> >
> >
>
> ------------------------------------------
> Submit A Repair Tip For Everyone Here:
> http://www.tech-assist.org/secure/tip/main.html
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.techassist.net/forms/change.html
>
------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
Other related posts:
