Tim, This set uses to HOT's, one horizontal out and one HV out.. If the HV out is blown, it takes out a couple resistors and is usually caused by cracked blue tube. Jeff Dougherty Intrepid Video TV/VCR 263 S Front St Steelton PA 17113 ph..717-939-7708 fax...717-564-4952 www.intrepid-video.com www.tech-repair.net A positive attitude may not solve all your problems, but it will annoy enough people to make it worth the effort. ----- Original Message ----- From: "Tim Poole" <tdp13158@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, April 15, 2004 10:09 PM Subject: [TechAssist] Maggotbox PTV620 Blows HOT Replaced Flyback and checked all surrounding diodes and resistors, Still blows h.o.t. at startup. Pulled board out and returned to shop. Anyone seen this? Checked all tips that I had but nothing found. Model# FP5230W104 Chassis# PTV620. Tim Poole pooletim@xxxxxxxxxxx tdp13158@xxxxxxxxxxx dba A-Mobile TV Shop & Precision TV Service 17626 Shady Lane Fredericktown, Ohio 43019 419-756-3443 740-694-8585 fax 740-694-1032 ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/