AN5277 Pin 8 is mute and pin 11 is standby. If i am correct both should be approx 5 volts. HTH Dan W Wizard Electronics Jacksonville, TX 75766 wizhd@xxxxxxxxxxxxxxxx ----- Original Message ----- From: "Avery Boyd" <adBoyd@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, May 26, 2005 2:43 PM Subject: [TechAssist] Mag model 36pt71 no sound > > I have audio to the output chip but nothing coming out, is there something > keeping the chip cut off, I have replaced the chip. ANY IDEAS? Thanks > Avery. > Avery Boyd > 4666B S. Mingo > Tulsa OK 74146 > Phone 918-665-2400 > > ----------------------------------------------------------------------------- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Appliance Repair List: > http://www.tech-assist.org/secure/tip/chatjoin.htm#app > Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app Email Archives: //www.freelists.org/archives/techassist/