Plastic surrond frame pulls off then remove screws agower@xxxxxxxxxxxxx ----- Original Message ----- From: "Lyles Tv" <tech@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, October 31, 2002 12:46 PM Subject: [TechAssist] Mag FP4625 PTV706 focus block?? > Mag FP4625 RTV706 > I've seen lots of posting fly by about the NAP focus blocks--well I finally have one (don't get many mags around here)that I suspect with that problem. Smeary, blurry pic, that cannot be adjusted in. Is this the obvious $2 question of the day? Heres the next one. I want to look at the tubes to see if they are cloudy and cannot figure out how to get the lenticular/fresnel off. No screws, or clips that I can see, and it feels like it is close to breaking when I try to lift it up. You would think that it was an old mitsubishi with a "secret screw" but I cannot find it if there is one. Believe it or not--any help is appreciated--lol > Jeff Farnsworth > Lyles TV and Appliance > 17 S Washington St > Elkhorn, Wi. 53121 > ph 262-723-3477 > fax 262-723-3658 > tech@xxxxxxxxxxx > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/