On Mon, 11 Nov 2002 07:16:17 -0800 (PST), you wrote: > >Look for a 100 mfd.@200v cap. >It's probably bad. >while you are there look for bad solder on the >regulators, and horizontal driver, and associated . >Walter >--- tvsteve <tvsteve@xxxxxxxxxxxx> wrote: >>=20 >> Magnavox TS2777C101, (27V504) has a intermittent >> horiz tear in the >> tuner video. OSD and direct video-in are fine. >> Checked all voltages >> and supply's for bad caps, also tried subbing the >> tuner. AGC and VT >> voltages are ok. It appears to tear on certain >> video content because >> some channels are ok. Elderly customer doesn't >> want to spend much to >> fix. Anyone run across this problem?=3D20 Thanks for the quick reply. C431 (100/200V) was the first thing I tried. This is a weird problem, like I said, it's only in the tuner video. If I call up the osd it is clean on top of the distorted pix. Also direct video input is clean.=20 Steve Television Service Center Steve Tomaszewski N2PTJ 6 North Hill Dr Ballston Lake, NY 12019 518-877-6665 ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/