This set came in D.O.A. has separate power supply pcb.Replaced ( used all SONY parts) R607.Q601 602.vdr 601. r622. C613 C613. IC643. D646. IC642. D603-610 (8). and the four 22 ohm resisters:609 610 616& 617.Also horiz output transistor and soldered drive path. Tested at low voltage ( 30-40 vac) no excessive current draw on bench.Put into set plugged in set came on with good pix and sound ran it 10 min. turned it off and unplugged it checked for overheating, now here is the strange thing plugged set back in (set should by in standby ) heard audio pop in speakers and HV coming up,looked at filaments and they are lit pushed POWER button heard deg relay and sound no pix turned up G2 and saw faint gray raster with line at top. (no vert).Replaced vert output TDA8172 same results, anybody seen this?Set will not power down. Country TV Ron Miller Inez, TX. 77968 ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/